RPM is intended to make system management easier, both for system administrators and other users who do all the day-to-day work of installing and removing applications and for developers and other users who do all the work of preparing applications for installation. For RPM packagers, the work involved in preparing an application for installation has two phases: first, the software must be compiled (if it is not written in an interpreted language such as Perl) and otherwise configured for the system on which it will be installed; then the RPM package of the software must be prepared by creating a spec file that properly packages it into an RPM. In contrast, packagers who choose to package applications in a simpler format, such as gzipped tarballs (compressed tar archives), have less work ahead of them, since they need only concern themselves with the first step.
After a packager has prepared an RPM package once, RPM makes the first step (compilation and configuration) easier when the packager has to package an updated version of the same software; RPM does a lot of work to track compilation commands, any needed patches, and any configuration modifications discovered to be necessary to prepare the software. Similarly, once an RPM spec file has been produced for an application, updating that spec file to support a newer version of that application is usually trivial. For these reasons, using RPM instead of a simpler, less end-user-friendly package format (such as gzipped tarballs) is a bit of a tradeoff for the packager; preparing an RPM of an application requires a little more initial time and work than preparing a gzipped tarball of that same application, but once created, the RPM package takes less time and effort to keep current than the gzipped tarball requires.
However, several helper tools are also available for RPM packagers. These tools can be used at various stages in the process of producing a high-quality RPM package to simplify the tasks that an RPM packager must perform. These tools include syntax-highlighting modes for various text editors, making production and maintenance of spec files easier; macro packages for popular text editors, simplifying the generation and maintenance of spec files; tools that generate spec files, simplifying initial spec file creation; and debuggers that validate produced binary RPMs, helping ensure that the spec file used to create the packages is accurate and high quality.
12.1.1. Using VIM spec plugins to improve spec file editing
Unix systems have traditionally shipped the legendary (or notorious, depending upon your point of view) vi editor (pronounced vee eye) as their default text editor. Vi was initially developed by Bill Joy in 1976 for BSD Unix. It eventually was incorporated in AT& T System V Unix as well and later was mandated by the POSIX 1003 standards (which define what an OS must have to be Unix-compatible), thereby conquering all facets of the Unix world.
The original vi source code is no longer freely available, but several clones of the vi program have been created over the years. The most popular of these vi clones is probably Vi IMproved, or VIM (www.vim.org). VIM is the standard vi implementation (meaning that when you type vi at the command prompt, the program you really are running is vim) on many Linux distributions, including Red Hat Linux. It is also freely available for most other Unixes and even for non-Unix systems such as Microsoft Windows.
VIM is a fully backwards-compatible implementation of the original vi editor, although it also offers many additional features that vi did not support. One VIM feature that can be extremely useful when preparing spec files is colorized syntax highlighting. VIM has an extensible interface through which it can be told about the syntax used for files of various types. Once it understands a filetype's syntax, it can color the various syntactic structures of that file in different ways. For example, when editing a Bourne shell script using VIM, comments are typically blue, control statements (if, for, do, and so on) are yellow, variables are purple, and so forth. Many people find this feature very useful, since a single glance reveals the entire logical structure of the file. Furthermore, errors in the file (such as a missing done statement failing to close a do loop in a Bourne shell script) are often immediately obvious when using such a colorizing editor.
Usually, VIM does not understand the structure of RPM spec files. When preparing a spec file, VIM displays all text in the same color. A spec.vim syntax file is available for VIM that makes VIM aware of the syntax used for RPM spec files. When this file is used, the various structural components (%define, preamble statements, %build, and so forth) are all colorized, making the logic of the spec file readily apparent.
The spec.vim file that provides VIM with an understanding of spec-file syntax is bundled with newer versions of VIM, or it can be downloaded from the Internet. Most RPM-based Linux distributions, including Red Hat Linux, ship this file with VIM as part of their distribution and even automatically configure VIM to load this syntax file any time an RPM spec file is being edited. When using VIM on a system that does not automatically load spec.vim whenever spec files are edited, you should download the spec.vim file (I tend to save such personal extensions in ~/etc/vim, but you can save it any place you prefer).
Cross Reference
Download the spec.vim syntax file for VIM from http://pegasus.rutgers.edu/~elflord/vim/syntax/spec.vim.
Once downloaded, configure VIM to load your new syntax file. You can do this by putting the following in your ~/.vimrc file (assuming you have saved the file as ~/etc/vim/spec.vim; adjust the path as necessary if you saved it elsewhere):
augroup syntax
au! BufNewFile,BufReadPost *.spec so ~/etc/vim/spec.vim
au BufNewFile,BufReadPost *.spec so ~/etc/vim/spec.vim
augroup END
This statement will instruct VIM to load the syntax file whenever a file named with a .spec extension is edited. You can now even customize the colors which VIM uses, if you like, by editing ~/etc/vim/spec.vim!
The VIM editor has hundreds of built-in commands for formatting text. If necessary, it can even be extended with new commands. Furthermore, these commands can be defined in FileType plugins, so that different commands are loaded depending upon the type of file being edited (just as different syntax matching can be used depending upon the type of file being edited). Gustavo Niemeyer has written a spec plugin, pi_spec, which defines various commands that can be used when working with RPM spec files. Currently, this plugin can be used to automate maintenance of the %changelog section of RPM spec files.
By default, the spec plugin provides a macro, spec_chglog, which is mapped to the <LocalLeader>-c key. Normally, the LocalLeader key in VIM is mapped to "\", a backslash character. This means you press \c to load the spec_chglog macro. If desired, you can instead map spec_chglog to a different key by putting a statement like the following in your ~/.vimrc file.
au FileType spec map <buffer> C <Plug>SpecChangelog
In this case, that statement would map the macro to the "C" key, but you can map it to a different key by replacing the "C" in the statement with whichever key or key combination you prefer.
The spec_chglog macro checks the %changelog in the spec file currently being edited and makes sure that the last entry in this %changelog was written today and was written by you. If it was, the macro adds a new item to the entry. If it was not written today, or was written today, but not by you, the macro adds an entirely new entry. Optionally, the macro also checks that the name, version, and release of the package are correct and will update the release if it is incorrect. In addition, the macro maps the percent key, %, making it usable in command mode in VIM to move quickly between section within a spec file.
To help spec_chglog, you can define a few variables in your ~/.vimrc file to customize its behavior. The variable spec_chglog_format defines what the macro uses for new %changelog entries. If you do not define this variable, the macro will ask you for an e-mail address and construct it for you the first time you use the macro. Alternatively, you can customize it yourself by adding an entry like the following to your ~/.vimrc file.
let spec_chglog_format = "%a %b %d %Y Your Name <your@email.address>"
The preceding format is what Red Hat's developers use for Red Hat Linux spec files and results in a %changelog entry that looks like the following, with the user name and e-mail address changed to protect the innocent:
* Mon Apr 15 2002 Bob Marley <bob@marley.yow>
The variables in the spec_chglog_format control the time format that is used. If you want different time formats in your %changelog entry, you can replace the variables (using %A instead of %a would cause the full weekday name, such as "Monday", to be printed) using the documentation in the strftime(3) man page as a guideline.
By default, the macro will insert new entry items after existing items. For example, if I already have a %changelog entry for today that reads as follows:
* Mon May 6 2002 Bob Marley <bob@marley.yow>
- Updated to newest release
Then, using the macro to add a new entry for an additional patch I added will, by default, result in an entry that reads:
* Mon May 6 2002 Bob Marley <bob@marley.yow>
- Updated to newest release
- Added Solaris compile patch
If I want, I can instead have new items inserted before existing items, so that my second entry instead looks like
* Mon May 6 2002 Bob Marley <bob@marley.yow>
- Added Solaris compile patch
- Updated to newest release
To have new items inserted before existing items, simply add the following line to your ~/.vimrc file:
let spec_chglog_prepend = 1
Optionally, the macro can track version and release numbers in the %changelog entries automatically. Adding the line
let spec_chglog_release_info = 1
results in the first item in every changelog entry automatically reflecting the version and release, so that my %changelog entry might instead look like the following:
* Mon May 6 2002 Bob Marley <bob@marley.yow>
+ httpd-2.0.36-2
- Updated to newest release
- Added Solaris compile patch
If this feature is enabled, the macro automatically checks the version and release information to make sure that they have increased. If they haven't, it will offer to update them for you. Add the following line to your ~/.vimrc file to disable this feature, if necessary.
let spec_chglog_never_increase_release = 1
This spec plugin ships with newer versions of VIM. Both it and the VIM spec syntax highlighting extensions can be very useful for speeding spec file editing and debugging, and are well worth trying out if you are a VIM user.
Cross Reference
You can find out more about vim at www.vim.org.
12.1.2. Adding functions with emacs rpm-spec-mode
Of course, not everyone in the world uses VIM. Another commonly used editor is the emacs editor originally developed by Richard M. Stallman. Unlike vi, emacs is not considered an essential Unix component and is not always found installed on a Unix system, although it is bundled with just about every Linux distribution.
Over the years, two major emacs variants have emerged. GNU Emacs is produced by the Free Software Foundation and can be downloaded from www.gnu.org/software/emacs/emacs.html. XEmacs is based on GNU Emacs and is available from www.xemacs.org. Historically, the two differed in their user interfaces (XEmacs, as the name suggests, had an X Window interface, though GNU Emacs has one as well these days) and in some technical details of how they operated. Both are freely available under the terms of the GNU GPL, so you can download and try either or both if they are not already on your system.
Cross Reference
Red Hat Linux includes RPMs of both GNU Emacs and XEmacs as part of the distribution, and most other Linux distributions will include one or both as well.
Like VIM, both GNU Emacs and XEmacs support syntax highlighting. They are also both extensible, having the ability to load mode files that add new commands and functions. Stig Bjørlykke has written a mode, rpm-spec-mode.el, which works with both GNU Emacs and with XEmacs to add many functions, making it easier to use when editing RPM spec files. Red Hat Linux includes and enables this mode in both GNU Emacs and XEmacs, as do many other Linux distributions.
Cross Reference
You can download this emacs mode from http://tihlde.org/~stigb/rpm-spec-mode.el.
After downloading, you will need to put the following lines in your ~/.emacs init files (for GNU Emacs) or ~/.xemacs init files (for XEmacs) to instruct emacs to load rpm-spec-mode whenever a file with a .spec extension is being edited:
(autoload 'rpm-spec-mode "rpm-spec-mode.el" "RPM spec mode." t)
(setq auto-mode-alist (append '(("\\.spec" . rpm-spec-mode)) auto-mode-alist))
Once installed, rpm-spec-mode will provide emacs with additional support for editing RPM spec files. Figure 13-1 shows this mode in GNU Emacs.
54965-0 Fg1301.tiff here; needs to be cropped to just the central window
Figure 13-1: Gnu Emacs using rpm-spec-mode
Figure 13-2 shows this mode in XEmacs.
54965-0 Fg1302.tiff here; needs to be cropped to just the central window
Figure 13-2: XEmacs using rpm-spec-mode
With this mode, emacs can do syntax highlighting of spec files, just like VIM. The mode file rpm-spec-mode.el contains the emacs instructions that specify what should be highlighted and what colors should be used for highlighting.
Tip
If you do not see syntax highlighting when you edit a spec file, your emacs session may or may not be currently configured to do syntax highlighting. First, make sure that the status bar at the bottom of your emacs window says (RPM-SPEC), indicating that rpm-spec-mode is being used. If it doesn't, double-check the rpm-spec-mode installation instructions. If the status bar does indicate that you are using rpm-spec-mode, also double-check that syntax highlighting (which, in emacs, is a global configuration option) has been enabled. In both GNU Emacs and XEmacs, the Options menu has a Syntax Highlighting option that must be enabled before emacs will colorize spec file syntactic structures.
In addition to providing syntax colorization, rpm-spec-mode adds a variety of new functions to emacs that can be used to speed the process of creating or editing RPM spec files. These new functions appear on the RPM-Spec menu that is added to emacs by rpm-spec-mode. Many of the functions are similar to the functions added to VIM by the spec_chglog macro. Navigation functions to move quickly through a spec file are provided, so that Ctrl+C, Ctrl+N (press Ctrl+C followed by Ctrl+N) will move the cursor to the next major section of the spec file, while Ctrl+C, Ctrl+P will move the cursor to the prior major section of the spec file. Similarly, macros are also defined to increment the release tag (Ctrl+C, R) and the very handy option to add new %changelog entries (Ctrl+C, E). Like the VIM macros for adding %changelog entries, the rpm-spec-mode command checks to see if an entry already exists for today. If not, it adds a new entry, but if so, it just adds a new item to the existing entry. For %changelog entries to have the correct e-mail address, the emacs variable user-mail-address must be set correctly. If it is not set on your system, you can add the following line to your emacs initialization files:
(setq user-mail-address "your@email.address")
In addition to these basic functions, rpm-spec-mode offers more advanced spec file creation support. Opening a new buffer in emacs for a spec file that does not already exist automatically generates a skeleton spec file.
To further speed things up, emacs offers a number of macros for the main tasks in writing an RPM spec file. Table 13-1 lists these macros.
Table 13-1Macro commands for The RPM SPEC MODE IN EMacs
Furthermore, rpm-spec-mode even adds macros to emacs that can be used to build RPMs from spec files without even having to exit emacs! Since the process of constructing spec files is often iterative (make new spec, build RPM from spec, find mistake, edit spec, build RPM from spec, find mistake, and so on), this capability of emacs to be used as an IDE for RPM package generation is extremely useful. Basic macros exist to do complete builds (Ctrl+C B to build a binary package, Ctrl+C S to build a source package, and Ctrl+C A to build both). Macros can also be used to execute various intermediate steps, such as the %prep stage (Ctrl+C P), the %build stage (Ctrl+C C), or the %install stage (Ctrl+C I). Various options of the build process can also be controlled, such as GPG-signing of generated packages.
If you are a user of GNU Emacs or XEmacs, you should definitely take the time to learn to use rpm-spec-mode. Being able to build packages from within the editor where you are editing the spec file that builds those packages is a great productivity gain for many people.
12.1.3. Validating and debugging spec files with rpmlint
Both VIM and emacs extensions help with the process of initially creating spec files and with the maintenance of existing RPM spec files. After a spec file has been created, and RPMs have been created using that spec, the binary RPMs generated from the spec can be validated using the rpmlint command. The name rpmlint comes from lint, the traditional Unix utility that can "sanity-check" C source code, looking for certain classes of common C coding mistakes. The idea behind rpmlint is similar; it processes binary RPMs, checking for certain common mistakes made by RPM packagers.
The rpmlint command currently ships with a wide variety of checks and is written using a modular interface so that additional checks can easily be added if needed. Currently, rpmlint can check that all binary files in the package are correct (making sure that a .noarch.rpm package does not contain binary files, that no binaries are being installed in /etc, that the binary file types in the package are appropriate for the package architecture, that shared libraries are configured correctly, and that all executables are stripped). It can also check the validity of files marked as configuration files in the RPM (ensuring that configuration files are only being installed in /etc, not in /usr) and that the package file complies with the distribution's policies for packages (checking things such as the compression of man pages and Info pages and the correctness of vendor and distribution fields in the package header).
In addition, rpmlint performs a variety of checks to ensure that the package complies with the Filesystem Hierarchy Standard (verifying that files are installed in their standard locations on the system), the Linux Standards Base (verifying that package-file naming is LSB-compliant) and that files have correct ownerships and permissions. Init scripts are double-checked (for packages that have init scripts) to ensure that the basic structure of the init script is correct and that appropriate %post and %preun configuration directives are being run to configure the init script on the system. %post, %pre, and %preun scripts are also double-checked (ensuring that only valid interpreters are specified for scripts and that scripts are written in valid syntax). The validity of the package itself is also checked in various ways (ensuring that the package is GPG-signed, that the package's source RPM is correctly prepared, that the package spec file uses correct syntax, and that all tags used in the package header are valid).
Cross Reference
To find out more about the Filesystem Hierarchy Standard, see www.pathname.com/fhs/. To find out more about the Linux Standards Base, see www.linuxbase.org.
Download rpmlint from www.lepied.com/rpmlint. It is written entirely in Python, so a Python interpreter is necessary to run it.
Once installed, rpmlint can be configured on a system-wide basis, using the /etc/rpmlint/config file, or on a per-user basis, using the $HOME/.rpmlintrc file. This file can specify checks to perform, check output that should be ignored, and configuration options. Configuration options can be specified, listing what entries are valid for various fields in the RPM header, such as the Vendor and Packager fields. By default, Red Hat Linux ships with this configuration file set to validate packages to make sure they are suitable for Red Hat Linux; if packaging for a different distribution, this file might need to be modified.
Once rpmlint has been installed and configured, it can be run against RPMs. For example, rpmlint helps with creating packages, such as tin (a popular Usenet client) for Red Hat Linux, since it is not included with the distribution. After preparing a tin spec file, then building RPMs from that file, you can typically double-check them using rpmlint.
For example, when running rpmlint on a source RPM, you’ll see output like the following:
$ rpmlint tin-1.5.12-1.src.rpm
E: tin no-packager-tag
W: tin invalid-license distributable
W: tin no-url-tag
W: tin strange-permission tin-1.5.12.tar.bz2 0664
W: tin obsolete-tag Copyright
$
For the most part, this package looks fine according to the rpmlint output. The permissions on the tin source code can be changed (0644 is the "preferred" permissions), and you might want to change my spec file to use the License tag instead of the now-obsolete Copyright tag. Similarly, you might want to add a URL tag to the package to point to the URL for the software.
When running rpmlint on a binary RPM, you’ll see output like the following:
$ rpmlint tin-1.5.12-1.i386.rpm
W: tin invalid-vendor None
W: tin invalid-distribution None
E: tin no-packager-tag
W: tin invalid-license distributable
W: tin no-url-tag
$
With this output, the binary package looks fine. You should set a I don’t bother setting a vendor, distribution, and packager but you can ignore those warnings. Similarly, rpmlint warns because it does not recognize the license type used, "distributable". You can fix this, you can ignore this, or you can modify /etc/rpmlint/config so that rpmlint recognizes "distributable" as a valid license.
The sorts of validity checks that rpmlint can do make it valuable for ensuring the quality and consistency of RPMs. Most RPM-based Linux distributions validate their entire distribution using rpmlint. Using it for packages you prepare is a good idea as well.
12.1.4. Generating the %files section with RUST
For the most part, maintaining RPM spec files is relatively straightforward. Creating spec files from scratch, however, can be a little bit more challenging. Tools like rpm-spec-mode for emacs can help with the process, generating skeleton spec file templates that can be filled in, but these sorts of tools do not address the step that most new RPM packagers seem to find most difficult: generating the %files section. Creating a complete, accurate list of all needed files supplied by an application can be difficult, particularly when it is an application with which you are unfamiliar. Most software supports installation to a temporary location; if the software you are packaging allows this, generation of %files is (almost) as simple as using BuildRoot to install the application to a temporary directory, then running an ls -lR command in that subdirectory to see all the installed files and directories. Even then, though, the output from ls -lR must be cleaned up and converted into %files format for adding to the spec file. All of this takes time.
A couple of tools exist to reduce the amount of work needed for this stage of the process, automating the generation of the %files section of spec files. The most sophisticated of these toolsets is RUST.
Cross Reference
Download RUST from www.rusthq.com.
RUST consists of two tools: crust and rust. The crust command provides a command-line tool that can create a chroot() jail, in which software can be built and installed, and then automatically generate a spec file that documents the files that were installed. This not only eliminates the need to generate a %files section for a spec file manually but also removes the need to modify software to support installation to a temporary location using BuildRoot, a sometimes difficult task.
The rust command provides a graphical front end to the crust command, as shown in Figure 13-3.
54965-0 Fg1303.tiff here
Figure 13-3: rust, a drag-and-drop spec file generator
The rust command provides a graphical interface that can be used to control crust and supports drag-and-drop creation of spec files. In the rust interface, two file trees are displayed. The left-hand tree displays the local file system, while the right-hand tree displays the file tree inside the crust chroot() jail. Files that should be packaged together can just be dragged from their current locations on the system (displayed in the left-hand tree) to their final destinations in the right-hand tree. You can then click the makeRPM choice to generate an RPM containing those files. Although not terribly useful for packages being generated from source code, this feature can greatly simplify creation of RPMs of applications that are only supplied in binary format (such as the Linux Adobe Acrobat reader).
RUST's rust application can be useful in some circumstances (providing new developers a graphical tool that can be used to generate binary RPMs), and crust is more generally useful for packaging difficult-to-package software that needs to be built and installed in a chroot() jail. Unfortunately, development of RUST appears to have stopped, so extension of RUST to become a more generally useful IDE for RPM generation is not likely to happen. However, the project is licensed under the GNU GPL (
Chapter 27, Licensing RPM ), so it might be resumed by another developer or team of developers.
12.1.5. setup.sh and MakeRPM.pl
Other tools that have been developed to simplify the process of creating an RPM spec file take an entirely different approach. Tools such as setup.sh, available from www.mmedia.is/~bre/programs/setup.sh, are intended to function as wrappers around the existing build commands (./configure and make) for software. These types of tools take the approach of using the standard build tools for software (since those tools must always be used to build the software, whether using RPM or compiling the software from a source tarball) and capturing the output to generate an RPM spec file automatically.
The MakeRPM.pl Perl script, available from www.perl.com/CPAN/modules/by-authors/id/JWIED, is another example of such an approach. MakeRPM.pl is a more specialized tool than setup.sh, as MakeRPM.pl is intended only for producing RPMs from Perl modules packaged in CPAN (www.cpan.org). It is implemented as a wrapper around the standard commands (perl Makefile.PL ; make ; make test ; make install) used to install Perl CPAN software.
MakeRPM.pl actually works quite well for its intended purpose@mdproducing packages of CPAN modules. The setup.sh script is currently viewable mainly as a proof of concept, rather than being a generally universal automatic spec file generator. In the future, when spec files are likely to be representable using a formal closed-syntax grammar, it is possible that more generalized spec file generation tools will be developed. Until that time, however, some of the previously mentioned tools, particularly the VIM and emacs extensions, can provide assistance when manually generating spec files.
Cross-reference
12.1.6. Manipulating Package Files with rpm2cpio
Normally, RPM packagers are concerned with taking source code or binary files, and producing an RPM that contains those files and can be used to install them on end-users' systems. Sometimes, packagers and end users find themselves in the opposite position, that of having a source or binary RPM package file and needing to extract its contents. An RPM can always be installed to access its contents (either source code, patches, and a spec file which get put under %_topdir for a source RPM, or software which gets put in system directories for a binary RPM), but that is often overkill. I frequently want to extract a single patch file, or the spec file, from a source RPM, but I don't really need to install the entire source RPM. Similarly, people often want to extract the contents of RPMs on systems that do not come with RPM, such as Solaris.
Fortunately, tools are available that can process RPM package files into a format from which their content can be extracted. Structurally speaking, RPM package files are compressed cpio archives that have additional binary data added to the beginning containing various meta-data about the package (specifying its architecture and OS, for example), a GPG signature if the package is signed, and so forth. If this binary data is removed from the beginning of the RPM package file, the remainder is a System V Release 4-style cpio file that can be manipulated using any reasonably complete cpio command. Several different tools, each sporting the name rpm2cpio, are available which can do this binary data removal, converting an RPM package file into a standard cpio archive.
RPM ships with an rpm2cpio utility that can be used to convert RPM package files to cpio files. (
Chapter 2, RPM Overview introduces the rpm2cpio utility.) For example, if you have a source RPM package file and want to extract its files without having to install it, you can process it through rpm2cpio. The rpm2cpio command takes as input an RPM package file, and produces a cpio file on standard output. For example, to redirect the output to a file, use a command like the following:
$ rpm2cpio fluxbox-0.1.8-2.src.rpm > fluxbox-0.1.8-2.cpio
$
This command creates a cpio archive from the package. You can later use cpio commands on the output file. You can also pipe the output of rpm2cpio through the cpio command:
$ rpm2cpio fluxbox-0.1.8-2.src.rpm | cpio -i -d
656 blocks
$
This command extracts the contents of the package.
This rpm2cpio command is bundled with RPM and is installed on most RPM-based Linux distributions, including Red Hat Linux. However, it is less useful on systems that do not come with RPM, such as Solaris. This "standard" implementation of rpm2cpio is written in C, and so must be compiled before it can be used. Since most commercial Unix systems do not come with a C compiler by default (unlike Linux and other free Unixes, such as the BSD operating systems), compiling this rpm2cpio code can be a major undertaking.
Fortunately, rpm2cpio implementations are also available in a couple of other languages, in more easy-to-install formats for other operating sytsems, including as a Bourne shell script or a Perl script. The Bourne shell syntax should work on any reasonably modern Unix system (and even a few non-Unix systems; it also works on Microsoft Windows under cygwin, for example). The script in Listing 13-1should be saved to a file named rpm2cpio.sh, marked executable, and copied to a directory in your path.
Listing 13-1: rpm2cpio as a Bourne Shell script
#!/bin/sh
pkg=$1
if [ "$pkg" = "" -o ! -e "$pkg" ]; then
echo "no package supplied" 1>&2
exit 1
fi
leadsize=96
o=`expr $leadsize + 8`
set `od -j $o -N 8 -t u1 $pkg`
il=`expr 256 \* \( 256 \* \( 256 \* $2 + $3 \) + $4 \) + $5`
dl=`expr 256 \* \( 256 \* \( 256 \* $6 + $7 \) + $8 \) + $9`
# echo "sig il: $il dl: $dl"
sigsize=`expr 8 + 16 \* $il + $dl`
o=`expr $o + $sigsize + \( 8 - \( $sigsize \% 8 \) \) \% 8 + 8`
set `od -j $o -N 8 -t u1 $pkg`
il=`expr 256 \* \( 256 \* \( 256 \* $2 + $3 \) + $4 \) + $5`
dl=`expr 256 \* \( 256 \* \( 256 \* $6 + $7 \) + $8 \) + $9`
# echo "hdr il: $il dl: $dl"
hdrsize=`expr 8 + 16 \* $il + $dl`
o=`expr $o + $hdrsize`
dd if=$pkg ibs=$o skip=1 2>/dev/null | gunzip
After you have marked this file as executable and placed it in your command path, you can use the script just like the C language implementation of rpm2cpio. This script also takes an RPM package file as input and produces a cpio file on standard output, and so should be used in conjunction with redirection or a pipe:
$ rpm2cpio.sh fluxbox-0.1.8-2.src.rpm | cpio -i -d
656 blocks
$
In this case, I piped the output to cpio, directly extracting it. I could have redirected the output of rpm2cpio.sh to a file instead.
In addition to the Bourne shell implementation of rpm2cpio, a version has been written in Perl by Roger Espel Llima. The Perl rpm2cpio implementation should work on any system that has a reasonably modern Perl interpreter. To use this version of rpm2cpio, the script in Listing 13-2 should be saved to a file named rpm2cpio.pl, marked executable, and copied to a directory in your path.
Listing 13-2:The Perl version of rpm2cpio, rpm2cpio.pl
#!/usr/bin/perl
# Copyright (C) 1997,1998,1999, Roger Espel Llima
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and any associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# SOFTWARE'S COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE
# (whew, that's done!)
# why does the world need another rpm2cpio? because the existing one
# won't build unless you have half a ton of things that aren't really
# required for it, since it uses the same library used to extract RPM's.
# in particular, it won't build on the HPsUX box i'm on.
# sw 2002-Mar-6 Don't slurp the whole file
# add a path if desired
$gzip = "gzip";
sub printhelp {
print <<HERE;
rpm2cpio, perl version by orabidoo <odar\@pobox.com> +sw
dumps the contents to stdout as a cpio archive
use: rpm2cpio [file.rpm] > file.cpio
Here's how to use cpio:
list of contents: cpio -t -i < /file/name
extract files: cpio -d -i < /file/name
HERE
exit 0;
}
if ($#ARGV == -1) {
printhelp if -t STDIN;
$f = "STDIN";
} elsif ($#ARGV == 0) {
open(F, "< $ARGV[0]") or die "Can't read file $ARGV[0]\n";
$f = 'F';
} else {
printhelp;
}
printhelp if -t STDOUT;
# gobble the file up
##undef $/;
##$|=1;
##$rpm = <$f>;
##close ($f);
read $f,$rpm,96;
($magic, $major, $minor, $crap) = unpack("NCC C90", $rpm);
die "Not an RPM\n" if $magic != 0xedabeedb;
die "Not a version 3 or 4 RPM\n" if $major != 3 && $major != 4;
##$rpm = substr($rpm, 96);
while (!eof($f)) {
$pos = tell($f);
read $f,$rpm,16;
$smagic = unpack("n", $rpm);
last if $smagic eq 0x1f8b;
# Turns out that every header except the start of the gzip one is
# padded to an 8 bytes boundary.
if ($pos & 0x7) {
$pos += 7;
$pos &= ~0x7;# Round to 8 byte boundary
seek $f, $pos, 0;
read $f,$rpm,16;
}
($magic, $crap, $section, $bytes) = unpack("N4", $rpm);
die "Error: header not recognized\n" if $magic != 0x8eade801;
$pos += 16;# for header
$pos += 16 * $section;
$pos += $bytes;
seek $f, $pos, 0;
}
if (eof($f)) {
die "bogus RPM\n";
}
open(ZCAT, "|gzip -cd") || die "can't pipe to gzip\n";
print STDERR "CPIO archive found!\n";
print ZCAT $rpm;
while (read($f, ($_=''), 16384) > 0) {
print ZCAT;
}
close ZCAT;
After set up, rpm2cpio.pl works much like the C and Bourne shell versions, so the following command can be used to generate a cpio archive from an RPM package file:
$ rpm2cpio.pl fluxbox-0.1.8-2.src.rpm | cpio -i -d
CPIO archive found!
656 blocks
$
Depending upon the system you are on, one or more of these three rpm2cpio programs should work. All three are useful any time you want to extract a file or files from an RPM package file but do not actually need to install the RPM.
